Lynx L22 Specifications
|
Analog I/O |
|
|
Number |
Two inputs / Two outputs |
|
Type |
Electronically balanced or unbalanced, XLR connectors on L2Audio Cable |
|
Level |
+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs |
|
Bandwidth |
<
10Hz - 92 kHz @ 200 kHz sample rate < 10Hz - 46 kHz @ 96 kHz sample rate < 10Hz - 23 kHz @ 48 kHz sample rate (analog input to analog output) |
|
Input Impedance |
Balanced mode: 24 kW , Unbalanced mode: 12 kW |
|
Output Impedance |
Balanced mode: 100 W, Unbalanced mode: 50 W |
|
Output Drive Capability |
600 W impedance, 0.2 µF capacitance |
|
A/D and D/A Type |
24-bit, multi-level, delta-sigma |
|
Sample Rates |
8 kHz to 200 kHz, including all standard rates with variable adjustment |
|
Bit Depth |
8, 16, 24 or 32 bit file types |
|
On-board Buffer Size |
16 Kbytes per input and output stream (mono or stereo) |
|
Analog In Performance |
(Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer) |
Frequency Response |
20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate |
Dynamic Range |
117 dB, A-wtd. |
Signal-to-Noise |
116 dB, A-wtd. |
Channel Crosstalk |
<-120 dB, 1 kHz signal @ -1dBFS |
|
THD+N |
-108
dB (0.0004%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1 kHz signal, 22Hz - 22kHz BW |
|
Analog Out Performance |
(Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer) |
Frequency Response |
20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate |
Dynamic Range |
117 dB, A-wtd. |
Signal-to-Noise |
117 dB, A-wtd. |
Channel Crosstalk |
<-120 dB, 1 kHz signal @ -1dBFS |
|
THD+N |
-97
dB (0.0014%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1kHz signal, 22Hz - 22kHz BW |
|
Digital I/O |
. |
|
Number / Type |
One
input and one output AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync Cable |
|
Sample Rates |
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
|
Sample Rate Conversion |
Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range |
|
Bit Depth |
8, 16, 24 or 32 bit file types |
|
Control / Status |
Complete subcode and channel status support |
|
On-board Buffer Size |
16 Kbytes per input and output stream (mono or stereo) |
|
LStream Expansion Ports |
. |
|
Number |
One external and one internal |
|
Compatibility |
Supports Lynx ADAT, AES/EBU, and other multi-channel expansion modules |
|
Type |
High-speed serial, eight channel input and output (each port) or sixteen channel input and output (single port), 24-bit data, 96kHz rate |
|
Clock I/O |
. |
|
Number |
External:
one input and output, BNC connectors on L2Sync Cable Internal: one input and output on board-mounted headers |
|
Level / Impedance |
TTL / 75W |
|
Type |
Input: word clock, 256X word clock, 13.5 and 27 MHz clocks; Output: word clock |
|
On-board Digital Mixer |
|
|
Channel Capacity |
32 input channels, 16 sub outputs |
|
Resolution / Dither |
32-bit / TPDF, Shaped TPDF, or RPDF |
|
Monitor Mixing |
Any input to multiple outputs |
|
Metering |
Peak levels to -114 dB on all inputs and outputs |
|
Connections |
|
|
Audio Port |
Bracket-mounted 25-pin female D-sub connector for analog audio input and output |
|
Sync Port |
Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out |
|
Cables (Included) |
. |
|
L22Audio Cable |
25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling |
|
L22Sync Cable |
15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75W coaxial cabling |
|
Software |
|
|
Windows Drivers |
Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and DirectSound |
|
Macintosh Drivers |
ASIO 2.0 for OS 9 |
|
L22 Mixer Application |
Provides complete control of digital mixer and all hardware settings. |
|
General |
. |
|
PCI Bus |
Version 2.2 compliant |
|
Data Transfers |
Up to 132 Mbytes/sec using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering |
|
Size |
5.0" H X 7.4" W X 0.75" D (half-size PCI card) |
|
Shipping Weight |
2.75 lbs. with cables |
|
Certifications |
CE and FCC Class B |
|
LStream Expansion Modules |
(Optional, for LStream ports) |
|
LS-ADAT |
Provides 16-channel/48kHz, 8-channel/96kHz or 4-channel/192kHz 24-bit ADAT optical I/O and ADAT Sync |
|
LS-AES |
Provides 8-channel/96kHz or 4-channel/192kHz 24-bit/96kHz AES-3 digital I/O |
© Copyright 2002, Lynx Studio Technology, Inc. All Rights Reserved.